4 or 8 programmable resistor channels 8 or 16 resistors per channel On-Board EEPROM for storing application specific calibration data 1Ω to 64 KΩ resistance in 1O resolution (other ranges and resolutions available) 3U PXI Instrument Module Description The GX1164 is a 3U PXI programmable resistor module with 4 channels of 16 resistors each or 8 channels of 8 resistors each. When used in the 4-channel configuration, each channel can simulate resistances from 1Ω to 64KΩ with 1Ω resolution. Features The GX1164 can be used in multiple configurations. The following configurations are supported: 4 Channels, 1Ω to 64KΩ, 1Ω resolution 2 Channels, 1Ω to 128KΩ, 1Ω resolution 1 Channel, 1Ω to 256KΩ, 1Ω resolution 2 Channels, 1Ω to 64KΩ potentiometer with a wiper, 1Ω resolution The GX1164 includes an on-board EEPROM that contains calibration data. The EEPROM can also be used to “personalize” the GX1164 for custom resistance ranges and resolutions. The driver provides a library of functions that are used to control and change the instrument settings from within your application. The instrument driver is provided for the Windows operating system (32 bit DLL). In addition to the driver library, various interface files provide access to the library from your favorite programming tools and languages. These interface files support ATEasy, LabView, LabWindows, C/C++, Microsoft Visual Basic, Delphi as well as other application development environments. Programming and Software The board is supplied a 32-bit DLL driver. Various interface files provide access to the DLL from programming tools and languages such as ATEasy, LabVIEW, C/C++, Microsoft Visual Basic®, Delphi, and more. The available virtual panel can be used to interactively adjust and control the instrument from a window that displays the current instrument settings and measurements. On-Line help file and PDF User's Guide provides documentation that includes instructions for installing, using and programming the board. Applications ATE systems Event timing measurements Sensor simulation and emulation Automated calibration and alignment See Also GT7404 - Power Interface and Prototype GTXI Card GX7404 - Power Interface and Prototype PXI Card MT1888 Series - Laser Source Simulator

	Ordering From USA (Prices are noted in USD)
To order call 1-888-837-8297 or order online via the form below.
Current Item(s)

GX1164 $1,750.00 Programmable Resistor Card. 4 Channels 1 Ohm to 64 KOhm, 1 Ohm Resolution GX1164-2 $1,950.00 Programmable Resistor Card. 4 Channels 2 Ohm to 128 KOhm, 2 Ohm Resolution GX1164-4 $1,950.00 Programmable Resistor Card. 4 Channels 4 Ohm to 256 KOhm, 4 Ohm Resolution GX1164-8 $1,950.00 Programmable Resistor Card. 4 Channels 8 Ohm to 512 KOhm, 8 Ohm Resolution

Accessory

		GX91801 $45.00
		25 Pin Male mating connector for GX1838/GX1164

		GX91802 $115.00
		25 Pin Male mating connector for GX1838/GX1164 with a 3' unterminated harness

		GX91803 $195.00
		3’ harness for GX1838/GX1164, 25 pin male/female connectors on both ends

Calibration

		GX91805 $345.00 GX1164 Calibration Service (Includes Pre/Post Data Analysis)
		GX91805-4 $635.00 GX1164 Calibration Service - 4 Years (Includes Pre/Post Data Analysis). Calibration Cycle is Every Two Years.
		GX91805-6 $911.00 GX1164 Calibration Service - 6 Years (Includes Pre/Post Data Analysis). Calibration Cycle is Every Two Years.